Test Programme; Interface - W&H teon + RID-200 Operating Instructions Manual

Disinfector
Table of Contents

Advertisement

Further settings
Ethernet
RS232
82

Test programme

Various programmes are available for monitoring cleaning perform-
ance in routine testing.
See "Maintenance" for more information on these programmes.

Interface

With W&H washer-disinfectors, cleaning processes can be docu-
mented. To enable this, these washer-disinfectors are equipped with
a module slot on the back to take a W&H communication module.
The communication module is available from W&H and comes with
its own operating instructions.
Only use terminal devices (PC, printers, etc.) which comply with
EN/IEC 60950.
Contact W&H for more information about communication modules,
software and suitable printers.
The XKM 3000 L Med communication module enables the establish-
ment of an Ethernet interface for digital archiving of process data via
external software.
The module can be connected to a WiFi network via an existing wire-
less access point.
A XKM RS232 10 Med communication module is required for direct
connection to a report printer.
The XKM RS232 10 Med can also be used for connection to a ter-
minal or terminal emulator. The data are transmitted in ASCII code.

Advertisement

Table of Contents
loading

Table of Contents