Table of Contents
Advertisement
Further settings
Switching off
after activating
Setting the wait
time duration
88
Open the menu as follows:
button
Further settings
Switch off after
Switch off after
Yes
–
The Auto-Off function is activated. A duration must be set after
which automatic switch-off should occur.
No
–
The Auto-Off function is deactivated.
Select an option using the and arrow buttons.
Press OK to save the setting.
Yes
If the
option is displayed, the wait time duration after which auto-
matic switch-off should occur must be set next.
The wait time duration can be adjusted in 5 minute increments. The
possible range is shown in the bottom line of the display.
Use the (higher) and (lower) arrow buttons to set the wait time
duration.
Press OK to save the setting.
Software version
You can use this menu to call up the software versions of individual
elements, e.g. when contacting W&H Service.
For more information see "Service".
Yes
No
Switch off after
60
Min
(5 - 120
Min
)
Advertisement
Table of Contents
