Table of Contents
Advertisement
Do not fill the reservoir with water.
The reservoir could overflow when filled with salt.
Add salt only until the funnel of the salt reservoir is full, so that it
can close properly. Do not add more than 2 kg of salt.
As the salt reservoir is being filled, displaced water (saline solution)
may run out.
Clean any excess salt from the area around the salt reservoir and
especially from the seal. Do not use running water as this can
cause the salt reservoir to overflow.
Close the funnel.
Run the
Rinsing
programme after refilling salt.
This will ensure that any traces of salt and saline solution are dis-
solved and rinsed away.
Salt and saline solution which has overflowed can cause corrosion
damage if they are not rinsed away.
Water softener
31
Advertisement
Table of Contents
