Table of Contents
Advertisement
Problem solving guide
Problem
Stainless steel items are
showing signs of corro-
sion.
130
Cause and remedy
The stainless steel is of insufficient quality for machine re-
processing.
Only use stainless steel items made of high quality stain-
less steel and follow the instructions of the manufacturer
regarding machine reprocessing.
The chloride content in the water is too high.
Have a water analysis check carried out. Connection to
an external water processing unit and the use of demin-
eralised water may be necessary.
Neutralisation has not taken place during the programme.
Check the level in the supply container and vent the dis-
pensing system if necessary.
Rust or superficial rust has built up in the wash cabinet,
e.g. due to an excessively high iron content in the water or
rust on other wash load items.
Check the installation.
Discard any rusty items.
Advertisement
Table of Contents
