Settings
70
Volume
A buzzer which is integrated into the control panel can give an acous-
tic signal in the following situations:
– When buttons are pressed (keypad tone)
– At the end of the programme
– System messages (information)
Open the menu as follows:
button
Settings
Volume
Volume
Buzzer tones
–
Setting the buzzer volume for programme end and system mes-
sages (information)
Keypad tone
–
Setting the buzzer volume for keypad tone.
Select an option using the and arrow buttons.
Confirm your selection with OK.
When
Keypad tone
has been selected you can adjust the volume im-
Buzzer tones
mediately. When
Warning
which tone,
volume for.
Keypad tone
Quieter
The volume level is represented by a bar chart. On the lowest setting
the buzzer tone is switched off.
Use the arrow buttons (
Press OK to save the setting.
Keypad tone
Buzzer tones
has been selected you must first select
Programme end
or
Louder
Louder
) and (
, you would like to adjust the
Programme end
Quieter
Louder
Quieter
) to set the volume.