Table of Contents
Advertisement
Increasing
drainage time
If there is still water remaining in the wash cabinet at the end of a
wash block, because e.g. the on-site drainage system is inadequate,
the following error message will be displayed to enable water to be
drained out of the wash cabinet within the designated time:
Check drainage
In this case the drainage time can be increased.
...
Drain time
Drain time
Standard
Increased
Standard
–
The standard drainage time setting applies.
Increased
–
Drainage time is increased by a strictly preset increment.
Programme duration will increase with this setting.
Select an option using the and arrow buttons.
Press OK to save the setting.
Programme settings
95
Advertisement
Table of Contents
