Technical Data - W&H teon + RID-200 Operating Instructions Manual

Technical data

Height with machine lid
Height without machine lid
Width
Depth
Depth with door open
Wash chamber dimensions:
Height
Width
Depth of upper basket/lower basket
Weight (net)
Max. load capacity of open door
Voltage, rated load, fuse rating
Connection cable
Water connection temperature:
Cold water/steam condenser
Hot water/DI water
Static water pressure
Minimum water connection flow pressure:
Cold water/steam condenser
Hot water
DI water
Recommended water connection flow pressure:
Cold water/hot water
DI water
Steam condenser
Delivery head
Drainage length
Operation:
Ambient temperature
Relative humidity maximum
linear decreasing to
Storage and transportation conditions:
Ambient temperature
Relative humidity
Air pressure
Altitude above sea level
Protection category (according to IEC 60529)
Soiling level (according to IEC/EN 61010-1)
Overvoltage category (according to IEC 60664)
Noise level in dB (A),
sound pressure LpA during cleaning and drying phases
Test certification
 marking
Manufacturer address
* If installed above 1,500 m, the boiling point of the wash water will be lower. In this case, the disinfecting temperature
and the holding time will need to be reset by the W&H Customer Service Department.
150
835 mm
820 mm
598 mm
598 mm
1,200 mm
520 mm
530 mm
474 mm/520 mm
78 kg
37 kg
See data plate
Approx. 1.8 m
Max. 20 °C
Max. 65 °C
Max. 1,000 kPa pressure
100 kPa pressure
40 kPa pressure
30 kPa pressure
≥ 200 kPa pressure
≥ 200 kPa pressure
≥ 100 kPa pressure
Min. 0.3 m, max. 1.0 m
Max. 4.0 m
5 °C to 40 °C
80 % for temperatures up to 31 °C
50 % for temperatures up to 40 °C
- 20 °C to 60 °C
10 % to 85 %
500 hPa to 1060 hPa
Up to 1,500 m *
IP21
2
II
< 70
VDE, EMC radio suppressed
MDD guidelines 93/42/EEC, Class IIb
Miele & Cie. KG, Carl-Miele-Straße 29,
33332 Gütersloh, Germany