Problem solving guide
Problem
All settings reset
All programme settings reset
Door
Problem
The door is open a fraction
and cannot be closed us-
ing the button.
Door not closed properly
Warning. Cabinet hot! Open
anyway?
126
Cause and remedy
This is not a fault.
A user has restored factory default settings.
Confirm the message with OK.
This is not a fault.
A user has restored the factory setting for the programme.
Confirm the message with OK.
Cause and remedy
This is not a fault.
The Comfort door lock has opened the door slightly at the
end of the programme.
Open the door. The door can now be closed completely
again using the button.
Slamming the door can result in problems with the Comfort
door lock.
Open and close the door.
If the same message appears again:
Contact the W&H Customer Service Department.
When pressing the button, be aware that the temperat-
ure in the wash cabinet is over 70 °C.
When the door is opened, hot steam and chemical
agents can escape!
Open the door only when strictly necessary.