Table of Contents
Advertisement
A damaged or leaking machine can pose a threat to your safety.
Always switch off a damaged or leaking machine immediately and
call the W&H Customer Service Department.
Personnel operating the machine should be trained regularly. Un-
trained personnel must not be allowed access to the machine or its
controls.
Only use chemical agents which have been approved by their
manufacturer for use in the application you are using. The chemical
agent manufacturer is responsible for any negative influences on the
material the load is made from and for any damage they may cause
to the machine.
Take care when handling chemical agents. These may contain irrit-
ant, corrosive or toxic ingredients.
Please observe the chemical agent manufacturer's safety instructions
and safety data sheets.
Wear protective gloves and goggles.
The machine is designed for operation with water and recommen-
ded additive chemical agents only. Organic solvents and flammable
liquid agents must not be used in it.
This could cause an explosion, damage rubber or plastic components
in the machine and cause liquids to leak out of it.
The water in the cabinet must not be used as drinking water.
Do not lift the machine by protruding parts such as the control
panel or the opened service flap as these could be damaged or torn
off.
Do not sit or lean on the opened door. This could cause the ma-
chine to tip up and be damaged or cause an injury.
Be careful when sorting items with sharp, pointed ends. Position
them in the machine so that you will not hurt yourself or create a
danger for others.
Broken glass can result in serious injury when loading or unload-
ing. Broken glass items must not be processed in the machine.
When operating the washer-disinfector, bear in mind the possibility
of high temperatures. If the door is opened bypassing the safety lock,
there is a danger of burning, scalding and chemical burns.
Should personnel accidentally come into contact with toxic va-
pours or chemical agents, follow the emergency instructions given in
the manufacturer's safety data sheets.
Mobile units, baskets, modules, inserts and the load must be al-
lowed to cool down before they are unloaded. Any water remaining in
containers could still be very hot. Empty them into the wash cabinet
before taking them out.
Warning and Safety instructions
15
Advertisement
Table of Contents
