Storing Job Data To Usb Memory Device; Selecting T Type/S Type - Sokkia CX-62 Operator's Manual

32.2 Selecting T type/S type

1. Press [USB] on the status screen.
2. Select "T type" or "S type".
Press [ENT] after selection.

• Select either "T type" or "S type"
according to the communication
format used.

"33.1 Configuration -Config
Mode-" Communication
Setup

32.3 Storing JOB Data to USB Memory device

The measurement data (distance, angle, coordinate), known point data input on
the CX, station point data and note stored in a JOB of the CX can be saved to the
USB memory device. Also, if multiple JOBs are selected, they can be saved to
one file.
• When selecting S type, the data is saved as a file with an extension
corresponding to the output communication format.
• When selecting T type, a file extension is automatically set corresponding to the
output communication format, but it can be deleted or changed to any other
extension.
PROCEDURE Data saving
1. Select "Save data" in USB mode.
32. USING USB MEMORY DEVICE
USB
T type
S type
USB
Save data
Load known PT
Save code
Load code
File status
242