Setting Up Data Storage; Job Setting - Sokkia SDL30 Operator's Manual

8.

Setting Up Data Storage

Data can be stored in Height difference measurement mode or
Elevation measurement mode. JOB setting mode and record setting
mode must be set up before data can be recorded.
JOB setting mode
Notes:
• *: Factory setting
• Settings are saved even after the instrument is turned off.
• Up to 2000 points can be registered. If 2000 points have already
been recorded, a beep tone sounds twice and the number of
free points remaining is displayed as "0". Measurement results
are not recorded. Press any button to return to the previous
screen.
• See "15.2 Data Output" and "14. JOB Delete" for how to "Output"
and "Delete" in the JOB setting mode.
• See "13. Displaying Recorded Data" for how to use "Review" and
"Memory" in the Record setting mode.
8.1

JOB Setting

Set the JOB containing the measurement data to be recorded.
Select from *JOB01 to JOB20.
Notes:
• Between 1 and 12 characters can be set for the JOB name.
• If measurement data has already been saved in the selected
JOB, the unit of measurement (m or ft) cannot be changed. The
same unit of data will be applied in the future to data that is saved
to the same JOB.
• JOB names already used cannot be set.
Record setting mode
29