Table of Contents
Advertisement
• No changes for the setting'
"Mode", "Authentication" and
"Check sum" from the factory
setting are necessary as long as
connecting to a recommended
program on the data collector. If
connection can not be
established, check the
communication settings of CX
and the data collector.
"
33.1 Configuration -Config
Mode- "Communication
Setup"", Output format and
command operations:
"Communication manual"
5. Press {ENT} to complete setting.
Proceed to Bluetooth
communication.
"
"10.2 Establishing a
connection between the CX
and paired Bluetooth device"
PROCEDURE Set Bluetooth communication mode to "Master"
• When setting communication mode to "Master", companion devices should be
registered first. If companion devices have already been registered, proceed to
step 8.
1. Power on the Bluetooth
companion device.
• Keep the Bluetooth address of
the companion device which is
required when registering the
device to the CX.
10. CONNECTING TO EXTERNAL DEVICES
A C K / N A K
C R , L F
A C K m o d e
39
:
N o
: N o
: S t a n d a r d
Advertisement
Table of Contents
