4. Adjust the levelling foot screws to
center the survey point in the
optical plummet reticle.
5. Continue to the levelling
procedure.
"7.2 Levelling"
PROCEDURE Centering with the laser plummet (
1. Set up the tripod and affix the
instrument on the tripod head.
"PROCEDURE Centering with
the optical plummet eyepiece"
steps 1 and 2
2. Press {ON} to power on
"9. POWER ON/OFF"
• The circular level is displayed on
the screen.
3. Press [L-ON].
The laser plummet beam will be
emitted from the bottom of the
instrument.
4. Use {}/{} to adjust the
brightness of the laser.
5. Adjust the levelling foot screws to
align the laser beam with the
center the survey point.
7. SETTING UP THE INSTRUMENT
O K
L-ON
L-lev.
O K
L-OFF
29
)