Table of Contents
Advertisement
becoming stiff, remove the connector caps before moving the CX to a cold
place.
• Never place the CX directly on the ground. Sand or dust may cause damage to
the screw holes or the centering screw on the base plate.
• Do not aim the telescope directly at the sun. Also, attach the lens cap to the
telescope when not in use. Use the Solar filter to avoid causing internal damage
to the instrument when observing the sun.
"36.2 Optional accessories"
• Protect the CX from heavy shocks or vibration.
• Never carry the CX on the tripod to another site.
• Turn the power off before removing the battery.
• When placing the CX in its case, first remove its battery and place it in the case
in accordance with the layout plan.
• Consult your local dealer before using the instrument under special conditions
such as long periods of continuous use or high levels of humidity. In general,
special conditions are treated as being outside the scope of the product
warranty.
Maintenance
• Always clean the instrument before returning it to the case. The lens requires
special care. First, dust it off with the lens brush to remove tiny particles. Then,
after providing a little condensation by breathing on the lens, wipe it with the
wiping cloth.
• If the display unit is dirty, carefully wipe it with a soft, dry cloth. To clean other
parts of the instrument or the carrying case, lightly moisten a soft cloth in a mild
detergent solution. Wring out excess water until the cloth is slightly damp, then
carefully wipe the surface of the unit. Do not use any alkaline cleaning solutions,
alcohol, or any other organic solvents, on the instrument or display unit.
• Store the CX in a dry room where the temperature remains fairly constant.
• Check the tripod for loose fit and loose screws.
• If any trouble is found on the rotatable portion, screws or optical parts (e.g.
lens), contact your local dealer.
• When the instrument is not used for a long time, check it at least once every 3
months.
"35. CHECKS AND ADJUSTMENTS"
• When removing the CX from the carrying case, never pull it out by force. The
empty carrying case should be closed to protect it from moisture.
• Check the CX for proper adjustment periodically to maintain the instrument
accuracy.
7
2. PRECAUTIONS
Advertisement
Table of Contents
