Reviewing Known Point Data - Sokkia CX-62 Operator's Manual

5. Press {ESC} to quit the point
name list and return to <Known
data>.
PROCEDUREClearing all coordinate data at once (initialization)
1. Select "Known data" in Data
Mode.
2. Select "Clear" and press {ENT}.
3. Press [YES].
<Known data> is restored.

30.2 Reviewing Known Point Data

It is possible to display all the coordinate data within the current JOB.
PROCEDURE
1. Select "Known data" in Data
Mode.
• Current JOB name is displayed.
2. Select "View".
The point name list is displayed.
30. REGISTERING/DELETING DATA
Clear
Comms setup
Known data
Job.JOB1
Key in coord
Comms input
Deletion
View
232