Laser Safety Information - Sokkia CX-62 Operator's Manual

3. LASER SAFETY INFORMATION

CX is classified as the following class of Laser Product according to IEC Standard
Publication 60825-1 Ed.3.0: 2014 and United States Government Code of
Federal Regulation FDA CDRH 21CFR Part 1040.10 and 1040.11 (Complies with
FDA performance standards for laser products except for deviations pursuant to
Laser Notice No.50, dated June 24, 2007.)
EDM device
in objective lens
Laser plummet (

• EDM device is classified as Class 3R Laser Product when reflectorless
measurement is selected. When the prism or reflective sheet is selected in
Config mode as target, the output is equivalent to the safer class 1.

Warning
• Use of controls or adjustments or performance of procedures other than those
specified herein may result in hazardous radiation exposure.
• Follow the safety instructions on the labels attached to the instrument as well
as in this manual to ensure safe use of this laser product.
AVOID EXPOSURE-Laser radiation
is emitted from this aperture.
Laser beam
emitted
from here
*
Laser beam
emitted
from here*
*: only for instruments with laser plummet (
Device
Light beam used for measurement
(When reflectorless measurement
is selected in Config mode)
Light beam used for measurement
(When prism or reflective sheet is
selected as target in Config mode)
Laser-pointer
)
9
LASER RADIATION
AVOID DIRECT EYE EXPOSURE
MAX 5mW LD 625-695nm
CLASS3R LASER PRODUCT
IEC 60825-1 Ed.3.0: 2014
)
Laser class
Class 3R
Class 1
Class 3R
Class 2