Table of Contents
Advertisement
2. In the list of JOBs, select the JOB
to be recorded and press {ENT}.
"Out" is displayed to the right of
the selected JOB. Multiple JOBs
can be selected.
3. After selecting the JOB(s), press
[OK].
4. Select output format.
(When T type is selected)
5. Enter the file name. Press {ENT}
to set the data.
• File extension name can be
entered when T type is selected.
After entering file name, press
{ENT}/{
} to move the cursor to
the extension name.
6. Select output format.
(When S type is selected)
Align the cursor with "Format" to
select the output format.
• Selecting "Yes" for "Send RED
data" on the second page
outputs the horizontal distance
data converted from the slope
distance.
32. USING USB MEMORY DEVICE
Save data
GTS(Obs)
GTS(Coord)
SSS(Obs)
SSS(Coord)
Save data
Obs data
Reduced data
JOB01. raw
: Jan/01/2012
Date
: 08:00
Time
Format:GTS(Obs)
123.4MB / 3.8GB
Remaining memory / Total memory size
JOB01. SDR
: Jan/01/2012
Date
: 08:00
Time
Format:SDR33
123.4MB / 3.8GB
Send RED data :
243
Yes
Advertisement
Table of Contents
