Sokkia CX-62 Operator's Manual page 259

V.obs (Vertical angle display
method)
Coord.
Ang.reso.(Angle resolution)
Sheet mod
Ofs V ang
Stn.ID Incr. (station ID incre-
ment)
V manual
Input order

Horizontal distance (H Dist)
The CX calculates the horizontal distance using the slope distance.
There are the following 2 ways to display the horizontal distance data.
Ground:
The distance that reflects neither the Sea level correction factor nor the
Scale factor.
Grid:
The distance in the plane rectangular coordinates system that reflects the
Sea level correction and Scale factors (or the distance in the plane
rectangular coordinates system that reflects the Scale factor only, when
"No" is set for "Sea level crn".)

• The horizontal distance data recorded in this instrument is the ground distance
only, and the displayed value changes according to the settings for the
horizontal distance. When reviewing the observation data in the TOPO menu,
set "Horizontal distance" and "Scale factor" so that the intended value is
displayed.
33. CHANGING THE SETTINGS
Zenith*, Horiz, Horiz 90° (Horizontal ±90°)
N-E-Z*, E-N-Z
1"*, 5"
On*, Off
Hold*, Free
0 to 99999 (100*)
Yes, No*
PT CODE*/CODE  PT
Slope distance
Ground
Projection
distance
Grid
251
Plane rectangular
coordinates system
Mean sea level