Table of Contents
Advertisement
[TOPO]
: To TOPO menu
[EDM]
: Setting EDM
[H-SET]
: Set required horizontal angle
[TILT]
: Display tilt angle
[MENU]
: To Menu mode (Coordinates measurement, setting-out
[REM]
: REM measurement
[RESEC]
: Resection measurement (The instrument station coordinate
[R/L]
: Select horizontal angle right/left
[ZA / %]
: Switch between zenith angle/slope in %
[HOLD]
: Hold horizontal angle/release horizontal angle
[CALL]
: Display final measurement data
[S-LEV]
: Return signal
[AREA]
: Surface area measurement
[F/M]
: Switch between meters/feet
[HT]
: Set the instrument station height and target height
[S-O LINE]
: Setting-out line measurement
[S-O ARC]
: Setting-out arc measurement
[P-PROJ]
: Point projection measurement
[PTL]
: PT to Line
[INTSCT]
: Intersections measurement
[TRAV]
: Traverse adjustment
[ROAD]
: Route surveying
[X SECT]
: Cross section survey
[TOPOII]
: Topography observation
[L-PLUM]
: Brightness configuration for laser plummet
[HVDOUT-T] / [HVDOUT-S]
: Output distance/angle measurement results to an external
[HVOUT-T] / [HVOUT-S]
: Output angle measurement results to an external instrument
[NEZOUT-T] / [NEZOUT-S]
: Output the coordinate results to an external instrument
[---]
: No functions set
measurement, offset measurement, repetition measurement,
missing line measurement, REM measurement, resection
measurement, surface area measurement, set-out line, set-out
arc, point projection, intersections, traverse)
can be recorded on the measurement result screen.)
instrument
33. CHANGING THE SETTINGS
262
Advertisement
Table of Contents
