Table of Contents
Advertisement
Select "Bluetooth setup" and
check that "Mode" is set to "Slave".
• Only "Slave" can be selected
when the CX is shipped.
3. Set "Authentication". Select "Yes"
or "No". If "Authentication" is set to
"Yes" for the CX, the passkey will
also need to be input on the
companion device.
4. When "Authentication" is set to
"Yes", input the same passkey as
that for the intended companion
device. Even if "Authentication" is
set to "No", a passkey is
requested when authentication is
set on the companion device
being used.
• Up to 16 numeral characters can
be input. "0123" is the factory
setting. Input characters will be
displayed as asterisks (e.g.
"*****").
10. CONNECTING TO EXTERNAL DEVICES
Wireless
Bluetooth setup
Link device list
My device info
Mode
Authentication : No
Check sum
38
:
Yes
:
Slave
: No
Advertisement
Table of Contents
