Sokkia CX-62 Operator's Manual page 44

• When "Resume" in "Instr. config" is set to "On", the screen previous to power off
is displayed (except when missing line measurement was being performed).

"33.1 Configuration -Config Mode-"
PROCEDURE Power OFF
1. Long push {ON} button.

• When there is almost no battery power remaining, the
displayed every 3 seconds. In this event, stop measurement, switch off the
power and charge the battery or replace with a fully charged battery.
• To save power, power to the CX is automatically cut off if it is not operated
for a fixed period of time. This time period can be set in "Power off" in
<Instr.config.>.

"33.1 Configuration -Config Mode-"
36
9. POWER ON/OFF
symbol will be