Using Usb Memory Device - Sokkia CX-62 Operator's Manual

32. USING USB MEMORY DEVICE

It is possible to read in/output data from/to a USB memory device.
• When using a USB memory device, data is stored in the root directory. You
cannot read/write data from/to subdirectories.
• When using the CX, an MS-DOS-compatible text file can be input/output.

• When "S type" is selected, only files with an extension of "SDR" can be
input/output. The CX cannot display files with an extension other than
"SDR" stored in a USB memory device. Also, an output code data file can
be displayed only when "T type" is selected. (The same will apply to a case
for saving a code while "S type" is selected.)
• You can neither save a file under the same name as a read-only file, nor
change/delete the name of a read-only file. (However, this varies depending on
the model or software you are using.)
• For "Communication Manual" that describes details on the communication
formats used for inputting/outputting data to/from a USB memory device,
please consult with your local dealer.
• When using the CX, you can use a USB memory device with the capacity of up
to 8GB.
240