Missing Line Measurement; Measuring The Distance Between 2 Or More Points - Sokkia CX-62 Operator's Manual

21. MISSING LINE MEASUREMENT

Missing line measurement is used to measure the slope distance, horizontal
distance, and horizontal angle to a target from the target which is the reference
(starting point) without moving the instrument.
• It is possible to change the last measured point to the next starting position.
• Measurement result can be displayed as the gradient between two points.
21.1 Measuring the Distance between 2 or more
Points
The distance between two or more points can either be measured by observing
the targets in question or calculating from input coordinates. A combination of
these two methods (e.g. observing the 1st target and inputting 2nd target
coordinates) is also possible.
PROCEDURE Measuring using observation
1. In the third page of OBS mode
screen, press [MLM], then select
"MLM".
MLM
Occ.Orien.
MLM
140