Storing Job Data To Usb Flash Drive - Sokkia iM-50 Series Operator's Manual

32.3 Storing JOB Data to USB flash drive

The measurement data (distance, angle, coordinate), known point data input on the iM, station point data and
note stored in a JOB of the iM can be saved to the USB flash drive. Also, if multiple JOBs are selected, they
can be saved to one file.
• When selecting S type, the data is saved as a file with an extension corresponding to the output
communication format.
• When selecting T type, a file extension is automatically set corresponding to the output communication
format, but it can be deleted or changed to any other extension.
PROCEDURE Data saving
1. Select "Save data" in USB mode.
2. In the list of JOBs, select the JOB to be recorded and press
{ENT}. "Out" is displayed to the right of the selected JOB.
Multiple JOBs can be selected.
3. After selecting the JOB(s), press [OK].
4. Select output format.
(When T type is selected)
5. Enter the file name. Press {ENT} to set the data.
• File extension name can be entered when T type is
selected. After entering file name, press {ENT}/{
the cursor to the extension name.
USB
Save data
Load known PT
Save code
Load code
File status
Save data
GTS(Obs)
GTS(Coord)
SSS(Obs)
SSS(Coord)
Save data
Obs data
Reduced data
JOB01. raw
Date
Time
} to move
Format:GTS(Obs)

123.4MB / 3.8GB
Remaining memory / Total memory size
175
32. USING USB FLASH DRIVE
: Jan/01/2017
: 08:00