Storing Job Data In The Cf Card - Sokkia 130R Series Operator's Manual

3. Close the card cover.
PROCEDURE Removing the CF card
Press the card eject button
24.3

Storing JOB Data in the CF Card

The measurement data (distance, angle, coordinate), kwnon point data input on
the SET, station point data and note stored in a JOB of the SET can be saved to
the CF card. Also, if multiple JOBs are selected, they can be saved to one file.
• Data is saved in the CF card with extension name .CRD.
• Up to 72000 points can be stored in a 8MB CF card (each file holds up to 10000
points). However, the number of points that can be saved is not fixed and
depends on the number of files that are created.
• 100points use about 8KB in the CF card.
24. CARD MODE
113