Table of Contents
Advertisement
5. To continue measurement, sight
the next point, press [MEAS], then
perform steps 3 and 4 above.
• Press [AUTO] to perform
distance measurement and
automatically record the results.
[AUTO] is convenient for
recording measurement data
when target height, code and
point name are not set.
• Press [OFFSET] to offset
measurement in TOPO Mode.
6. Press {ESC} to quit measurement
and restore <TOPO>.
• In the screen displaying [AUTO], press trigger key to perform automatic
operation from distance measurement to recording.
28.5 Recording Coordinate Data
Coordinate data can be stored in the current JOB
PROCEDURE
1. Perform coordinates
measurement in the OBS mode
screen.
"14. COORDINATE
MEASUREMENT"
28. RECORDING DATA - TOPO MENU -
SD
ZA
HA-R
HR
PT
OFFSET
SD
ZA
HA-R
R e c o r d e d
216
MEAS
AUTO
Advertisement
Table of Contents
