Table of Contents
Advertisement
Figure 9-11
5. Disconnect the gas springs, then remove the bolts
securing the hood as shown to allow for removal.
Figure 9-12
6. Carefully remove the hood from the machine and
set it aside.
Figure 9-13
7. Remove the bolts securing the rear valance panel
to the chassis to allow for removal.
9. Loader/Transmission Controls
Figure 9-14
8. Carefully remove the rear valance from the
machine to allow access to the loader valve.
Loader Valve
Figure 9-15
9. Locate the loader valve on the side of the
hydraulic reservoir.
Disconnect
Figure 9-16
10. Disconnect all of the tubes from the loader valve.
Cap and plug all openings to prevent fluid loss.
9-5
Compact Track Loader
Advertisement
Table of Contents
