Table of Contents
Advertisement
Compact Track Loader
6. Chassis Disassembly and Assembly
Note: Make sure that the wire on the sending unit is not
bent and the fuel pickup line does not interfere with the
movement of the float.
3. Connect the hoses and wires to the fuel-sending
unit, and then install the screws that fasten the
unit to the tank.
Note: Be careful not to cross the wires or hoses. If the
fuel sending unit wires are crossed, the fuel gauge will not
work. If the hoses are crossed, the engine will not run.
4. Install the seat. Refer to Chapter 6. Seat Instal-
lation procedure.
6-4
Advertisement
Table of Contents
