Table of Contents
Advertisement
End Wheels
The tools required for wheel removal and installation
are listed in table 11-2. Use manufacturer recommend-
ed tools whenever possible.
Table 11-2
Required Tools
Socket/impact wrench
Heavy duty hydraulic jack
Combination wrench
Suitable mechanical supports (2)
Removal
Figure 11-7
1. Raise and support the machine on Suitable
mechanical supports in the front and rear.
Figure 11-8
2. Clean the threads with a plastic or wire bristle
brush, then loosen the turnbuckle as shown to
lower the drive table and create slack in the track.
11. Undercarriage Disassembly and Assembly
Figure 11-9
3. Remove the bolts securing the wheel to the hub.
Figure 11-10
4. Slide the track outward as you pull on the wheel to
remove the wheel.
Installation
1. To install the end wheels, reverse the removal pro-
cedure. Torque the end wheel mounting bolts
upon installation to 95 +/- 10 Lb. Ft. (129 +/-
13Nm)
11-3
Compact Track Loader
Advertisement
Table of Contents
