5
Working Operation
Danger to life
due to incorrectly fastened work attachments.
• Daily before commencing work and after
every change of work attachments, a
check must be carried out to ensure that
the work attachment is correctly fastened,
and the quick-mount hitch is properly
locked.
• The bucket must be moved carefully at a
low height.
•
Before commencing loading work, memorize the
lever controls well.
•
During loading operations, driving and work move-
ments should flow in smooth succession.
•
Drive slowly when familiarizing yourself with the
controls.
5.1
Operation - Loader
•
Switch on the work equipment (25/35).
Operation - Bucket
•
Operate joystick (25/6).
Operation - additional control circuit (adjustable)
•
Additional control circuit (25/53) in Position 1.
•
Press right-hand / left-hand push-button switch
(25/5) (e. g. open/ close multi-purpose bucket).
Attention
The additional control circuit must always be
switched off unless additional equipment is
operated. The hydraulic power of a number of
attachments must be adjusted, e. g. rotation-
al speed of sweepers, etc.
•
Move the attachment to operating position.
•
Operate the turning knob (25/49) to adjust
hydraulic power (e. g. rotational speed).
TL160
Fig. 25 Operating the loader
Operating Manual 12.9.08 Version 1.0
Working Operation
P
12 Km/h
-
+
00014,0 h
1/2
0
35
P
12 Km/h
-
+
00014,0 h
1/2
0
4/4
49
5
4/4
5
6
53
P
53/112