Filter Assembly Removal - Terex R160T Service & Repair Manual

Compact Track Loader
8. Hydraulic Reservoir Disassembly and Assembly

Filter Assembly Removal

Hot oil can cause personal injury. Make sure the
oil is cool before removing any components or lines.
Remove the oil filler cap only when the engine is
stopped and the machine has been allowed to cool
thoroughly
Note: During disassembly, cap all hoses and fittings to
prevent fluid loss and contamination of the system fluids.
Figure 8-1
1. Remove the screws securing the cover to the
filter assembly.
Figure 8-2
2. Remove the cap from the filter assembly as
shown.
Figure 8-3
3. Remove the filter from the reservoir as shown.
Figure 8-4
4. Disconnect the hose from the filter assembly.
Figure 8-5
5. Remove the bolts securing the filter head as-
sembly to the reservoir.
8-2