Table of Contents
Advertisement
Chapter Overview
This chapter contains product safety information for the
Terex R160T/R190T Compact Track Loaders. Read
and understand all product safety information before
attempting to service any Compact Track Loader.
Safety Alert Symbol
This symbol means: Attention!
Be alert! Your safety is
involved!
The safety alert symbol is used
to alert you to potential personal
injury hazards. Obey all safety messages that follow
this symbol to avoid possible injury or death.
This symbol is used as an attention-getting device
throughout this manual as well as on decals and labels
fixed to the machinery to assist in potential hazard
recognition and prevention.
Property or equipment damage warnings in this
publication are identified by the signal word "NOTICE".
NOTICE
"NOTICE" Indicates a hazardous situation which,
if not avoided, could result in property or equip-
ment damage.
The word "Note" is used throughout this manual to
draw your attention to specific topics or to supplement
the information provided in that section.
Improper or incomplete maintenance/repair of a
Compact Track Loader can be dangerous and
may result in machine damage, injury or death.
Do not attempt to perform any type of repair or
maintenance on a Compact Track Loader until you
have read and fully understood both this manual and
the machine specific operation and maintenance man-
ual.
Refer to the Operation and Maintenance manual for
instructions regarding proper machine operation and
maintenance techniques before operating or servicing
any Compact Track Loader.
The person(s) in charge of servicing a Compact Track
Loader may be unfamiliar with many of the systems on
the machine. This makes it especially important to use
caution when performing service tasks. Familiarize
yourself with the affected system(s) and components
before attempting any type of maintenance or service.
It is not possible to anticipate every potential
hazard. The safety messages included in this
document and displayed on the machine are
not all-inclusive. They are intended to make you aware
of potential risks and encourage a safe approach to
performing service work.
If you use a tool, procedure, work method or operating
technique that is not specifically recommended by
Terex, you must satisfy yourself that it is safe for you
and others. You must also ensure that the machine
will not be damaged or be made unsafe by the
operation, lubrication, maintenance or repair
procedures that you choose.
Basic Precautions
Safety Labels
Safety labels have been included and are displayed in
various places throughout the machine to serve as
warnings of potentially dangerous conditions. Read
and understand all "Safety" labels on any Compact
Track Loader before attempting to operate, maintain or
repair it. Replace any damaged, illegible or missing
labels immediately, prior to service.
Personal Protective Equipment
Personal protection equipment is recommended when
performing maintenance or service on a machine.
Always wear appropriate protective equipment for
working conditions when working on or around the
machine. Loose clothing should not be worn and long
hair should be restrained. Wear hard hats, protective
face/eyewear, safety shoes and any other equipment
necessary to ensure your safety and the safety of
others around you as you work.
1-1
1. Product Safety
Advertisement
Table of Contents
