Table of Contents
Advertisement
Figure 16-11
4. Using a ruler, measure the distance between the
straightedge and track. The track should not de-
flect more than 0.75" (1.9 cm) between the top
of the track and the straightedge.
5. If the track deflects more than 0.75" (1.9 cm),
tighten the track between 0.50" (1.3 cm) and
0.75" (1.9 cm).
Fuse Box
Figure 16-12
The fuse box is located on the left side of the engine
compartment. The machine should never be operat-
ed with the fuse box cover removed.
Grease Fittings
Figure 16-13
The locations of the grease fittings for the left side of
the machine are shown above. An identical set of
fittings is located on the right side of the machine.
These fitting should be lubricated at least after every
10 hours of operation using Terex Multi Purpose
EP Lithium Grease.
13-5
Compact Track Loader
13. Maintenance
Advertisement
Table of Contents
