Table of Contents
Advertisement
Compact Track Loader
12. Loader Disassembly and Assembly
Collect and contain liquids in a suitable
container. Dispose of all liquids according to local
regulations and mandates.
Note: During disassembly, cap all hoses and fittings to
prevent fluid loss and contamination of the system fluids.
1. Lower the loader arms onto a mechanical
support with the arms resting about 6 inches
(15.24 cm) off the ground.
2. Turn the ignition switch to the OFF position.
Remove
Figure 12-1
3. Remove the bolt on the pin assembly on the
loader tower.
Figure 12-2
4. Remove the pin assembly.
Bolt
Remove
Pin
Figure 12-3
5. Remove and cap the hose on the base end of
the cylinder.
Figure 12-4
6. Remove and cap the hose on the loader end of
the cylinder.
Figure 12-5
7. Remove the forward pin assembly bolt.
12-2
Lift
Cylinder
Remove
Hose
Remove
Hose
Remove
Bolt
Advertisement
Table of Contents
