Working Operation; Operation - Loader - Terex TL120 Operating Instructions Manual

5

Working Operation

Danger to life
due to incorrectly fastened work attachments.
• Daily before commencing work and after
every change of work attachments, a
check must be carried out to ensure that
the work attachment is correctly fastened,
and the quick-mount hitch is properly
locked.
• The bucket must be moved carefully at a
low height.
• Before commencing loading work, memorize the
lever controls well.
• During loading operations, driving and work
movements should flow in smooth succession.
• Drive slowly when familiarizing yourself with the
controls.
5.1

Operation - Loader

• Switch on the work equipment (21/35).
Operation - Bucket
• Operate joystick (21/6).
Operation - Additional control circuit
• Additional control circuit (21/47) in Position 1.
• Press right-hand / left-hand push-button switch
(21/5) (e.g. open/ close multi-purpose bucket).
Attention
The additional control circuit must always be
switched off unless additional equipment is
operated.
Operating Instructions Wheel Loader TL120
Working Operation
35
Fig. 21 Operating the loader
5
5
6
47
L824-022
51