WAGO 8FDI 24V PROFIsafe 750-662/000-004 Manual page 124

124 Glossary
W
WAGO-I/O-CHECK
WAGO-I/O-CHECK is a manufacturer tool used to configure WAGO I/O modules.
To parameterize the F I/O modules, WAGO-I/O-CHECK and WAGO Safety
Editor are required (see also "WAGO Parameterization Tool").
WAGO Parameterization Tool
The WAGO parameterization tool is required for configuring the F I/O modules.
This consists of the two manufacturer tools WAGO-I/O-CHECK and WAGO
Safety Editor (see also "WAGO-I/O-CHECK").
WAGO Safety Editor
WAGO Safety Editor (abbreviated SEDI) is required together with WAGO-I/O-
CHECK 3.x for configuring the F I/O modules. SEDI is the CPD tool for WAGO
F I/O Modules (see also "CPD Tool (Configuration, Parametrization and
Diagnosis Tool)").
Manual
Version 1.0.0, valid from HW/SW Version 01/01
WAGO I/O System
750-662/000-004 8FDI 24V PROFIsafe