Using The Optional Internal Rewind - Datamax Prodigy Plus Operator's Manual

2.5.1

Using the Optional Internal Rewind

If the Internal Rewind Option is installed in your Printer, then the media
and Arc Plate should be installed as described below.
Note: The Arc Plate is supplied only with the Internal Rewind Option.
1. Turn off the Printer and open the Side Access Cover.
2. Follow steps 2, 3, and 4 of Section 2.5 before installing media.
3. Open the Lower Right Front Panel.
4. Remove the Arc Plate from its stored position and install it on the
front of the Printer as shown in Figure 2-6.
Figure 2-6 Installing the Arc Plate for Internal rewind
Prodigy Max Operator's Manual 19