Using The Printer's Control Panel - Datamax Prodigy Plus Operator's Manual

1.5 Using the Printer's Control Panel

The Printer has three operator-accessible buttons, three indicator
lights (LEDs), one switch, and one POT, (see Figure 1-6). A brief
description of the buttons, light, switches and POT are listed in this
section.
Figure 1-6 Switches and Indicators
Power Light:
Pause Light:
6
Getting Started
This light is turned on after the Power Switch on
the rear of the Printer is activated.
This light will turn on if any of the following
occurs: the Pause Button is pressed; a print job is
canceled with the Stop/CancelButton, or; a fault
occurs with the Cutter.
Prodigy Plus