Media Sensor Adjustment - Datamax Prodigy Plus Operator's Manual

5.3.2

Media Sensor Adjustment

To detect the media's edge for different media widths, the Media Sensor
can be adjusted across half the media path. The Media Sensor may
require adjustment when changing to a media of a different width. The
gauge behind and below the printhead can be viewed for making this
adjustment
1. Open the Side Access Cover.
2. Make sure that the media guide is moved to the edge of the media.
3. Rotate the Media Sensor Adjustment knob clockwise to adjust for
narrower media and counterclockwise for standard width media.
Note: Do not force or over tighten the Media Sensor Adjustment
Knob.
Prodigy Max Operator's Manual
Figure 5-3 Media Sensor Adjustment
61