Datamax Prodigy Plus Operator's Manual page 77

Lists of Approved Media
For a current list approved standard Media for use in Thermal and
Thermal-Transfer Printers, please contact your customer support
representative.
Indicators and Switches
Indicator Lights:
Switches:
Communications Interfacing
Communications
Character Set:
Word Length:
Handshaking:
Input Buffer:
Prodigy Plus
Specifications
Power, Paper/Ribbon, Pause
Power, Pause, Feed, Stop/Cancel, Thermal/Thermal
Transfer, Rear communications DIP switch (SW I)
and darkness potentiometer.
IEEE RS-232C IRS-422 at 300, 600,
1200, 2400, 4800, or 9600 baud
ANSI ASCII character set
Selectable 7-bit or 8-bit data format
XOn/XOff (in receive mode only) and
CTS/DTR
Approximately 7000 bytes. Xon/XOff is
transmitted and DTR goes low when 768
bytes are available in the buffer. Xon is
transmitted and DTR goes high when 1000
bytes are left in the buffer.
F-5