Programming Examples - Datamax Prodigy Plus Operator's Manual

The commands used for bit mapped font loading are usually
generated by font-creation software. However, the Assign Font ID
Number command must be sent to the Printer before the font file.
Font-Loading Commands are listed in Table 2-6.
CC
*c###D
)s#W
*c#E
(s#W
CC = Command Character
P = Must Supply Parameters? (Y/N)
PR = Printer Responds? (Y/N)

2.2 Programming Examples

<STX> L <CR>
H07 <CR>
D11 <CR>
19110080100002510K OHM 1/4 WATT <CR>
1a6210000000050590PCS <CR>
E
Prodigy Plus
P PR
N N Assign Font ID Number
### = ID Number 100 to 999
Y N Font Descriptor
N N Character Code
# = ASCII Value of Character
Y N Character Download Data
# = Bytes of Bit-mapped Data
Table 2-6 Font-Loading Commands
10K OHM 1/4 WATT
Figure 2-1 Sample Label
Printer Setup
Description
19