Datamax Prodigy Plus Operator's Manual page 138

The STX L command switches the Printer from the system level to the
label-formatting command. All command characters after STX L are
interpreted as Label Formatting Commands until terminated with E,X, or
s. All label formatting commands are terminated with 0D HEX.
CC
: Set cut by amount (4 digits)
The cutter function will perform a cutting
action after the number of labels specified
A Set format attribute
C Set column offset amount
c Set cut by amount (2 digits)
D Set height and width dot size
E Terminate field generation and print label
G Place data in global register
H Enter heat setting
(The amount of heat applied per dot row can
be used to help control print quality)
M Mirror text/bar code
m Set metric mode
P Print speed
Enter maximum speed for print cycle, 1
character
p Set label backup speed
Q Enter quantity of labels to print
R Set row offset amount
r Recall stored label format
S Slew speed
Sets maximum speed for label feeding. 1
digit.
Table 4-4 Label Formatting Commands
48
Description Format
:nnnn
nnnn = 4 digits of labels printed
before cut. Default = 0001
An n = 1 - XOR
2 - Transparent
3 - Opaque
5 - Inverse
Cnnnn nnnn = Inches/100
cnn nn = 2 cut amount
h = Horiz. dot size; can be 1 or 2
v = Vert. dot size; can be 1,2, or 3
(0.005" steps) Default is "D22"
Hnn nn = 2 digits. 1 - 30
10 is nominal and default
Print contrast is relative to speed
Second transmission restores print
Pa a = single char.
C 2.0 ips I 5.0 ips
D 2.5 ips J 5.5 ips
E 3.0 ips K 6.0 ips
F 3.5 ips L 6.5 ips
G 4.0 ips M 7.0 ips
H 4.5 ips N 7.5 ips
pa a = single char. (C - I)
Qnnnn nnnn = quantity
Rnnnn nnnn = row offset
rnn...n nn...n label name of up to
16 char. terminated by CR
Sa a = single character
C 2.0 ips I 5.0 ips
D 2.5 ips J 5.5 ips
E 3.0 ips K 6.0 ips
F 3.5 ips L 6.5 ips
G 4.0 ips M 7.0 ips
H 4.5 ips N 7.5 ips
Prodigy Max Operator's Manual
O 8.0 ips
P 8.5 ips
Q 9.0 ips
R 9.5 ips
S 10.0 ips
O 8.0 ips
P 8.5 ips
Q 9.0 ips
R 9.5 ips
S 10.0 ips