Braun Infusomat Space Service Manual page 53

EN Infusomat® Space 6.0
Disassembly / Assembly
Note
Once the new processor PCB has been installed, the saved data
must be transferred back to the device
pg. 3 - 41).
Service Parts and Screw Kit
All small parts, such as cover caps, are contained in an Infusomat®
Space service part kit. Some of the service parts can also be or-
dered separately in service packs.
Designation
Service part kit Infusomat® Space . . . . . . . . . . . . . . . . 3452 1593
contains:
Housing cover cap (100 pieces)
Plug D=4mm for front flap hinge (5 pieces)
Cap for housing upper part (access to pressure adjustment)
(2 pieces)
Housing foot SP (10 pieces)
Snap-in hook SP with leaf spring (2 pieces)
Emergency release plug ISP incl. O-ring (2 pieces)
Emergency release crank ISP (1 piece)
Bracket locking (20 pieces)
Seal washer PA 2.2x4x0.3 (200 pieces)
Safety clamp seal, housing bottom part (10 pieces)
Injection intermediate piece (air inline sensor test) (2 pieces)
Cover cap kit for housing SP (50 pieces) . . . . . . . . . . . 3477 4386
Emergency release plug ISP (10 pieces) . . . . . . . . . . . 3477 3101
Connector P2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3477 4355
Connector P3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3477 4359
Gasket P2 and P3 SP (10 pieces each) . . . . . . . . . . . . . 3477 4357
Connector seal P2 SP (5 pieces) . . . . . . . . . . . . . . . . . . 3477 3102
Repair kit Power Supply P2 small . . . . . . . . . . . . . . . . .3477 4311
contains:
Cable repair kit (10 pieces)
Spacer sleeve 6.2x10x50 (12 pieces)
Shrink tubing small/black (44 pieces)
Shrink tubing small/white (12 pieces)
Shrink tubing large/white (12 pieces)
3
(see „Processor PCB" ➨
Order No.
3 - 7