INVT Goodrive350A Series Operation Manual page 204

Goodrive350A series high-performance multifunction VFD
Function
Name
code
Upper limit
frequency bias
P08.53
value in torque
control
Upper limit
frequency
P08.54
ACC/DEC selection
in torque control
Enabling auto
P08.55 carrier frequency
reduction
Min. carrier
P08.56
frequency
Temperature point
P08.57 of auto carrier
frequency reduction
Interval of carrier
P08.58
frequency reduction
AI1 disconnection
P08.59
detection threshold
AI2 disconnection
P08.60
detection threshold
AI3 disconnection
P08.61
detection threshold
P08.62 Output current filter 0.000–10.000s
Description
1: No lock on STO alarm
No lock on STO alarm indicates STO alarm
disappears automatically after state
restoration if STO occurs.
0.00 Hz–P00.03 (Max. output frequency)
Note: Valid only for torque control.
0: No limit on acceleration or deceleration
1: ACC/DEC time 1
2: ACC/DEC time 2
3: ACC/DEC time 3
4: ACC/DEC time 4
0: Disable
1: Enable
Note: Automatic carrier frequency reduction
indicates that the VFD automatically reduces
the carrier frequency when detecting the heat
sink temperature exceeds the rated
temperature. When the temperature
decreases to a certain degree, the carrier
frequency recovers. This function reduces the
chance of VFD overheat alarm.
0.0–15.0kHz
40.0–85.0° C
0–30min
0–100%
0–100%
0–100%
-199-
Function parameter list
Default Modify
○
0.00Hz
○
0
○
0
Depends
●
on model
○
70.0° C
○
10min
○
0
○
0
○
0
○
0.000s