Table of Contents
Advertisement
WAGO I/O System 750 XTR
750-677/040-000 4PWM 24 VDC 0.2A XTR
Table 9: Technical Data − Outputs
Number of outputs
Output current per channel
Switching frequency (max.)
PWM pulse duty factor
PWM frequency
Operating modes
Diagnostics
Data width
Supply voltage (field)
Derating (supply voltage)
Supply voltage (system)
Power consumption
(5 V system supply)
Power consumption, field supply
(module with no external load)
isolation
Current carrying capacity
(power jumper contacts)
Number of incoming power jumper
contacts
Number of outgoing power jumper
contacts
see Section "Operating Modes"
*)
*)
.
Device Description
4 (Push-Pull)
0.2 A short-circuit-protected;
0.4 A short-circuit-protected in bridge
mode
20 kHz
0 ... 100 %; 11-bit resolution
0 ... 20,000 Hz; integer
1: PWM DC (variable duty cycle);
2: PWM Frq (variable frequency);
3: PWM Frq-Cnt;
4: Pulse Frq-Cnt;
5: PWM Pulse-Dir
•
Per module: Undervoltage;
•
Per channel pair of a bridge:
Short circuit after Uout+ or Uout–
4 × 16-bit data;
4 × 8-bit control/status
24 VDC (−25 ... +30 %);
via power jumper contacts
(power supply via blade contact;
transmission via spring contact)
Surrounding air temperature under
laboratory conditions: (−25 ... +30 %);
For −40 ... +55 °C: 24 V (−25 ... +20 %);
For +55 ... +70 °C: 24 V (−25 ... +10 %);
Lower limit in all temperature ranges:
−27.5 % (including 15 % residual ripple)
5 VDC; via data contacts
85 mA
20 mA
500 V system/field
10 A
2
2
27
Manual
Version 1.0.0
Advertisement
Chapters
Table of Contents
