Cage Clamp; Figure 4: Cage Clamp ® Connectors; Table 5: Legend For Figure "Cage Clamp ® Connectors - WAGO 750 XTR Manual

22 Device Description
3.2.3

CAGE CLAMP

Figure 4: CAGE CLAMP
Table 5: Legend for Figure "CAGE CLAMP
Channel
1
2
3
4
-
*)
for negative switching configured output (inverted output)
**)
for positive switching configured output (non-inverted outpu)
Use shielded signal lines!
Only use shielded signal lines for analog signals and I/O modules which are
equipped with shield clamps. Only then can you ensure that the accuracy and
interference immunity specified for the respective I/O module can be achieved
even in the presence of interference acting on the signal cable.
Manual
Version 1.0.0
® Connectors
® Connectors
Designation Connector
DO 1
DO 2
DO 3
DO 4
Uout+
Uout−
Uout+
Uout−
WAGO I/O System 750 XTR
750-677/040-000 4PWM 24 VDC 0.2A XTR
® Connectors"
Function
1 Output 1
5 Output 2
4 Output 3
8 Output 4
2 Reference potential LSS
3 Reference potential HSS
6 Reference potential LSS
7 Reference potential HSS
*)
**)
*)
**)