Chapter 9 - Modem (Transparent) Mode; Introduction - Multitech MultiConnect MTS2SA-T User Manual

Chapter 9 – Modem (Transparent)

Introduction

In the modem mode (also called transparent mode), raw data is communicated between serial ports 1
and 2. This means that:
•
Data received on serial port S0 is transmitted on serial port S1
•
Data received on serial port S1 is transmitted on serial port S0
Transparent mode can be used in the following applications:
•
The MultiConnect IP is used as a Modem
•
Serial Tunneling
Prerequisites
•
Transparent Mode must be enabled
# set operation-mode modem
•
Host Interaction mode must be disabled
# set serial s0 host-interaction-mode disable
•
Enable Switching-between Data mode and Command mode
# set serial s0 escape-monitor enable
•
Set the Escape-Monitor-String to switch between Data mode and Command mode
# set serial s0 escape-string "+++inets0"
Multi-Tech Systems, Inc. MultiConnect Serial-to-Serial Adapter User Guide (S000354A)
Chapter 9 – Modem (Transparent) Mode
Mode
81