Scenario 9 - Receiving A File From The Ftp Server - Multitech MultiConnect MTS2SA-T User Manual

Scenario 9 - Receiving a File from the FTP
Server
This scenario describes the receiving of a file from the FTP server:
a) With Automatic Authentication enabled by specifying all authentication details: IP address of the
device, valid login name, valid password, and valid account password.
b) Data connection in ACTIVE mode.
Description
Configuration
Command
Result Response
Multi-Tech Systems, Inc. MultiConnect Serial-to-Serial Adapter User Guide (S000354A)
The MultiConnect IP establishes a control connection, automatically checks for the
configured values, and logs into the FTP server. If successfully logged in, the
MultiConnect IP sends a message and prompts the host device to enter the
Filename, and then it sends a message as shown here:
Connected
Filename: filename <CR>
size = <filesize from server>
Press <CR> to receive file
<CR>
------ File Transfer ----
When the complete file is received, the FTP session responds with OK.
By default the data connection is in active mode. The client sets the data transfer
mode as 'BINARY/IMAGE' during the file transfer.
Note: If the '-p' option is specified in the command, the data connection will be in
passive mode
set ftp machine <ip-address/host-name> login <user-name> password <passwd>
account <passwd>
ftp -r [-p] ip-address
OK: FTP session closed
Chapter 15 – FTP Client
166