Multitech MultiConnect MTS2SA-T User Manual page 56

Command Syntax
Description
Default Value
Success
Error
Command Syntax
Description
Default Value
Success
Error
Multi-Tech Systems, Inc. MultiConnect Serial-to-Serial Adapter User Guide (S000354A)
ftp < [-l] [-t] [-r] > [-p] <ip-address/host-name>
Triggers the FTP client to establish the FTP session with the remote server
and to perform the required action according to the specified option.
-p : Opens the Data connection in Passive mode. (If this option is not given,
the data connection will be opened in Active mode by default).
-l : Requests for the directory and lists the contents of the specified
directory in the server.
-t : Requests for the filename and filesize to the transmitted and reads the
data from the host device and transmits to the server.
-r : Requests for the remote filename to be received. It informs the host
device about the size of the file and retrieves the data from the server when
serial device is ready.
Note:
1. FTP session can be aborted by issuing Ctrl+C at any given time.
NULL
OK
1. Invalid arguments
ftp < [-l] [-t] [-r] > [-p] <ip-address/hostname>
Type set ftp ? for more information"
2. Too few arguments
"Usage: ftp < [-l] [-t] [-r] > [-p] <ip-address/hostname>
Type set ftp ? for more information"
show ftp configuration
Displays the FTP profile configured in the MultiConnect IP.
NULL
OK
1. Too few arguments
Possible value(s) are configured.
Chapter 4 – Command Line Interface (CLI)
FTP Client Commands – Setup
FTP Client Commands – Show
56