Multitech MultiConnect MTS2SA-T User Manual page 51

Command Syntax
Description
Default Value
Success
Error
Command Syntax
Description
Default Value
Success
Error
Multi-Tech Systems, Inc. MultiConnect Serial-to-Serial Adapter User Guide (S000354A)
send-mail [-b]
[-t <email-address1, email-address2, ...>]
[-c <email-address1, email-address2, ...>]
[-s <data>]
[-d <msg body>]
Triggers the SMTP Client application. The application enters the interactive
mode or sends the mail according to the command arguments.
Notes:
All the arguments are optional. This implies that an email can be sent by
specifying the parameter(s) in the command line (or) entering them in the
order prompted by MultiConnect IP.
Usage:
-b : binary mode {default is text mode}
-t : To addresses
-c : CC addresses
-s : Subject Data
-d : Message Body
-
Email Sent Successfully
OK
1. Too few arguments
Usage: send-mail [<-b>] [ -t <email-address, ...>] [-c <email-address,
>] [-s <data>] [-d <msg body>] ...
Type 'send-mail ?' for more information"
show send-mail configuration
Displays the SMTP configuration.
-
OK
1. Too few arguments
"Usage: show send-mail configuration
Type 'show send-mail ?' for more information"
Chapter 4 – Command Line Interface (CLI)
SMTP Client Commands – Setup
51